Skip to content

WorldEditSUI Plugin do Minecraft 1.20.1, 1.21.1

Wizualizuj swoje zaznaczenie WorldEdit za pomocą cząsteczek!

wyświetleń
30 wyświetleń
Zaktualizowano
Zaktualizowano 03.09.2026

Overview

  • This plugin visualizes your current WorldEdit selection with fancy particles!
  • You can customize the shown particle effect, their amount and enable an advanced grid (useful for bigger selections). To take a look at other options, look at the configuration section below!

Covered are cuboid, spherical, ellipsoid, cylinder, 2D polygonal and 3D polyhedral selections (see below for examples).

  • You can also display your copied selection (//copy), which can be toggled with the WESUI command. You can also show a specific WorldGuard region by using the /wesui showregion command

Compatibility

This plugin runs on all versions from 1.9 onwards, needs no additional dependencies and (almost) never breaks on version updates. It is compatible with the following versions and forks of WorldEdit:

  • WorldEdit
  • FastAsyncWorldEdit
  • AsyncWorldEdit

and AsyncWorldEditPremium

If you want to run this plugin on a 1.8.x server, you can download a legacy version from the GitHub Releases page.

Commands

Available commands and their permissions are: \

  • /wesui - wesui.command
  • /wesui reload - wesui.command.reload
  • /wesui toggle - wesui.command.toggle
  • /wesui toggleclipboard - wesui.command.toggleclipboard
  • /wesui showregion - wesui.command.showregion

wesui.maxselectionsize.bypass - bypass the selection size limit set in the config

Examples

Cuboid selection with advanced-grid enabled

Sphere/ellipsoid selection

2D poly selection

Support

Found any bugs or want a new feature? Join my Discord guild.

Configuration

If enabled, the positions for particles will only be calculated once per selection and then cached.

This essentially entirely removes the higher CPU usage of the calculations, but results in some caching if many/big selections are being made.

Disable this if you run into concurreny errors.

cache-calculated-positions: true

A list of all particles can be found here: https://hub.spigotmc.org/javadocs/bukkit/org/bukkit/Particle.html

Just note that newly introduced particles obviously won't work in older versions.

Shown for the selection you currently have.

If you want to use a particle that requires extra data (REDSTONE, FALLING_DUST, BLOCK_DUST, BLOCK_CRACK, ITEM_CRACK),

you can read up on how to do that at the bottom of the plugin's Spigot page.

The same applies to per-particle view-distance, speed, and offsets.

particle: FLAME

Shown for the clipboard (after using WorldEdit's //copy command).

Can be enabled with the '/wesui toggleclipboard' command.

clipboard-particle: VILLAGER_HAPPY

Shown for the WG region view (when using '/wesui showregion ').

wg-region-particle: VILLAGER_HAPPY

How many particles should be displayed for every block of length.

particles-per-block: 3

This number determines how many ticks should be between every sending of particles.

Can be set from 5 to 200.

For reference: 20 Minecraft ticks are equivalent to 1 second -> 10 ticks are 0.5 seconds -> 1 tick is 0.05 seconds.

particle-send-interval: 12

Max ping a player can have before particles are no longer sent - this option only works on Paper servers.

Set this to -1 to disable.

max-ping: 150

Selecting giant areas may result in a high cpu usage or server lag.

This limits the maximum number of blocks that can be displayed (default is 10 million, ~250*150*250 blocks).

You could still go even higher if they can only be used by trusted people.

max-selection-size-to-display: 10_000_000

If set to true, players with the 'wesui.maxselectionsize.bypass' permission ignore the limit from above.

enable-max-selection-bypass-perm: true

advanced-grid:

If enabled, the selection will not only be displayed by the outline,

but also with a grid between the outlines (the bigger the selection, the bigger the grid).

Requires more or less 2 to 3 times the amount of calculations, but looks amazing!

enabled: false

How many particles should be displayed for every block of length.

particles-per-block: 2

advanced-clipboard-grid:

You can also enable the grid for the clipboard view.

Same as advanced-grid settings, but for the clipboard.

enabled: false particles-per-block: 2

advanced-wg-region-grid:

You can also enable the grid for the WG region view by using the '/wesui showregion ' command.

Same as advanced-grid settings, but for the WorldGuard regions.

enabled: false particles-per-block: 2

particle-expiry:

If enabled and a selection isn't changed for the given amount of seconds, particles will stop being sent for it

enabled: false expires-after-seconds: 180

If enabled, players are notified if their particles disappear after the expiry.

expire-message: true

If set to 'none', every player will have their selection displayed.

Else, only players with the set permission will have particles for their selection.

permission: "none"

send-particles-to-all:

If enabled, the particles will be sent to all players, rather than just to the player having the WorldEdit selection.

Might be useful when building as a group.

enabled: false

You can also limit those seeing the particles by a permission. Leave 'none' to let all players see them.

Warning: If you have a (bad) perm plugin that does not cache its checks / takes a while for permission checks, leave this at 'none'.

view-others-particles-perm: "none"

If you want people to see different particles for another player's selections, you can set them here.

others-particle: FLAME others-clipboard-particle: VILLAGER_HAPPY

If set to false, players will have to use '/wesui toggle' first to be able to see the particles.

show-selection-by-default: true

If set to false, players will have to use '/wesui toggleclipboard' first to be able to see the particles.

show-clipboard-by-default: false

Saves toggles to a file, so that they stay changed after player quits and server restarts.

This also includes the clipboard toggle.

persistent-toggles: false

Changes the distance from which particles can be seen, can be set from 1 to 500 (if you for some reason want to see them 500 blocks away).

This does NOT affect server performance in any way.

particle-viewdistance: 99

update-checks: true

Jak zainstalować WorldEditSUI

  1. A server on Paper

    The plugin runs on the server core for Minecraft 1.9–1.21.11; players do not need to install anything.

  2. File goes into the plugins folder

    Download the file WorldEditSUI-1.8.0.jar (116 KB) and put it into the server’s plugins folder.

  3. Restart the server

    On startup the plugin creates its own settings folder in plugins.

  4. Or use the “To hosting” button

    On Millida Hosting, the button at the top of the page uploads the file to your server and restarts it for you.

Minecraft 1.21.11 runs on Java 21: with a different Java version the game may close right after launch.

Wersje

Z zależnościami

MinecraftLoaderPlikDataAkcje
1.21.11Paper1.21.11116 KB—

FAQ

Which Minecraft versions does WorldEditSUI work on?

There are files for 1.9–1.21.11, 60 versions in total. The newest is 1.21.11.

Do players need to install WorldEditSUI?

No, the plugin goes only on the server Paper, into the plugins folder: players do not need to download anything.

Which Java does WorldEditSUI need?

Minecraft 1.21.11 runs on Java 21. If the game closes right after launch, the usual cause is the wrong Java version in the profile settings.

How do I download WorldEditSUI?

With Millida Launcher: it installs WorldEditSUI into a modpack by itself, for the right game version and loader. The launcher is free.

Opinie

Oceń WorldEditSUI jako pierwszy

Komentarze 0

Zaloguj się, aby komentowaćZaloguj się

Podobne pluginy

Wszystkie pluginy

Więcej o tym

Autor: kennytvLicencja: Unspecified

Jesteś autorem? Napisz do nas — usuniemy w ciągu 48 godzin.